Article 1-a “design and construction”:
|
Design Category/ item
|
Lh According to ISO 8666
|
ECB Certification modules
|
|
|
|
Full Internal production control possible
|
Internal production control plus tests
|
EC type examination
|
Product verification
|
Unit verification
|
|
A
|
> 12 m
|
No
|
|
B (+C)
|
(B+) F
|
G
|
|
|
< 12 m
|
No
|
Aa
|
B (+C)
|
(B+) F
|
G
|
|
B
|
> 12 m
|
No
|
|
B (+C)
|
(B+) F
|
G
|
|
|
< 12 m
|
No
|
Aa
|
B (+C)
|
(B+) F
|
G
|
|
C
|
> 12 m
|
No
|
|
B (+C)
|
(B+) F
|
G
|
|
|
< 12 m
|
Yes*
|
Aa
|
B (+C)
|
(B+) F
|
G
|
|
D
|
2,5 to 24
|
Yes
|
Aa
|
B (+C)
|
(B+) F
|
G
|
|
Personal watercraft
|
---
|
Yes
|
Aa
|
B (+C)
|
(B+) F
|
G
|
|
Components listed annex II
|
---
|
No
|
|
B (+C)
|
(B+) F
|
G
|
|
Partially completed craft***
|
2,5 to 24
|
n.a.
|
|
ECB (hull) type certificate
|
|
ECB (hull) certificate
|
|
Components not listed in annex II****
|
---
|
n.a.
|
|
Certificate of compliance
|
ECB certificate of conformity
|
|
|
* Minimum required module, if harmonized standard for stability and buoyancy (ISO 12217 series) is NOT complied to at least an
additional module Aa is also required as a minimum.
** For all products B may be used in conjunction with a module C.
*** Certificates applied in the voluntary domain generally in support of the IIIa declaration of the manufacturer. These certificates
may cover some essential requirements of the directive. This may be any combination of requirements. See also RSG RFU 31.
**** Certificates applied in the voluntary domain. Components not listed in annex II may be certified to comply with the applicable
(ISO) requirement(s).
|
Article 1-b “exhaust emissions”:
|
Product
|
Certification modules
|
|
|
Full internal production control possible
|
Internal production control plus tests
|
EC type examination
|
Product verification
|
Unit verification
|
|
Propulsion engines
|
No
|
|
B* (+C)
|
(B+) F
|
G
|
|
Propulsion engines subject to “major engine modification”
|
No
|
|
B* (+C)
|
(B+) F
|
G
|
|
* For all products module B may be used in conjunction with a module C. A NoBo must however be involved in testing if manufacturer is not working under a relevant quality system.
|
Article 1-c “noise emission”:
|
Product
|
Certification modules
|
|
|
Full internal production control possible
|
Internal production control plus tests
|
EC type examination
|
Product verification
|
Unit verification
|
|
Recreational craft with stern drive engines without integral exhausts or inboard propulsion engine installations.
|
See
art. 1-a
|
Aa*
|
|
|
G
|
|
·When based on froude number and power displacement calculations.
|
yes
|
Aa
|
|
|
G
|
|
·When assessed using certified reference boat data.
|
yes
|
Aa
|
|
|
G
|
|
Recreational craft with stern drive engines without integral exhausts or inboard propulsion engine installations which are subject to a major craft conversion and subsequently placed on the community market within five years following conversion.
|
See
art. 1-a
|
Aa*
|
|
|
G
|
|
·When based on froude number and power displacement calculations.
|
yes
|
Aa
|
|
|
G
|
|
·When assessed using certified reference boat data.
|
yes
|
Aa
|
|
|
G
|
|
Personal watercraft.
|
See
art. 1-a
|
Aa
|
|
|
G
|
|
Outboard engines and stern drive engines with integral exhaust intended for installation on recreational craft.
|
See art. 1-b
|
Aa
|
|
|
G
|
|
* May only be used if manufacturer or its authorized representative uses, and complies to, harmonized standard for noise emission
requirements (ISO 14509).
|
|
